Congratulations on purchasing your Rigid Core Luxury Vinyl Plank Flooring and Moldings. All Malibu Rigid Core Floors and Moldings are manufactured under the strictest quality controls. We hope you will enjoy your new floor and Moldings. The Color of all Malibu Wide Plank Moldings will coordinate well with your Malibu Wide Plank Rigid Core Flooring. Moldings available are Quarter Round, Flush Stair Nose, or 3-in-1 which offers versatility as a Reducer, T-Mold, or End Cap.
Molding Installation Guide Measuring Tape, Pencil, Saw/Cutting device, Scissors, Personal Protective Equipment such as Safety Glasses and hearing protection. This is used to transition from a higher-profile (or thickness) floor to a lower-profile floor. Cut Reducer and Track to same desired length. Secure Track to floor with glue or molding tape and press or tap Reducer into Track to desired depth using rubber mallet.
Molding Installation Guide Starting at one end, place the Reducer into the Installation Track and continue “snapping” the Reducer (lengthwise) into the Track. Apply pressure across the Reducer until Reducer is in place and both edges of Reducer are snug and in position on top of the two adjoining floors. Wait 24 hours to walk on. Used to create finishing touch between floor and baseboards. Measure and cut to fit. Affix molding using glue or molding tape.
Molding Installation Guide DIAGRAMS (REDCAP: Carps Floor subeditor Track DIAGRAMS (REDUCER): Marble/ Porcelain/ Tile Floor DIAGRAMS (T-MOLD): Floor Floor sub floor] Track
Molding Installation Guide DIAGRAMS (QUARTER ROUND): DIAGRAMS (FLUSH STAIR NOSE): S Subnormal * For immediate assistance and troubleshooting please call our Home Depot Technical Services department @ 800-928-6168. * Molding Diagrams are for illustration only outlining transitions from different hard or soft surface flooring types.
