Brochure

Malco Products, Inc. | Annandale, Minnesota, U.S.A. | www.malcotools.com | [e-mail] | ©2016
Catalog
Number Description Chuck Requirements Impact Driver Requirements Net Weight
C5A2 TurboCrimper IMPACT 1/4 in. Quick Release Min. 12V DC, Max 7A AC 30 oz. (848 g)
C5A2RD EV Replacement Drive Shaft
TurboCrimper IMPACT
Replacement Drive Shaft
Begin at angle
Exit at slight angle
Min. 12V DC
Impact Driver
with quick
release 1/4 in.
Hex Chuck.
FASTER THAN HAND CRIMPERS
Operating Tips
Use with
Impact
Driver
Only
Simple effective design increases speed and ease of crimping
30 – 24 gauge (0.41 – 0.71 mm) galvanized steel round duct and
(0.31 - 0.61 mm) cold rolled steel stove pipe.
The compact TurboCrimper IMPACT is easy to balance while in use and
stores easily in a pouch or bag when not in use.
Engineered for Superior Performance. • Limited Lifetime Warranty against manufacturing defects
in materials or workmanship. • Go to www.malcotools.com for more details.
No set-up or adjustment is needed to immediately begin crimping
multiple sizes, types and thickness of round metal duct, including
spiral duct, and metal stove pipe.
Based on actual field trials. The Malco TurboCrimper IMPACT is designed
to work with a Minimum 12 Volt DC Cordless or Maximum 7 Amp AC Corded
IMPACT DRIVER equipped with a Quick Release 1/4 inch Hex Chuck.
TIME SAVING, LABOR SAVING
STORAGE? NO PROBLEM.
CHUCK IT UP AND GO
5X
5X
C5A2
Crimps 30 – 24 Ga.
(0.41 - 0.71 mm)
Galvanized Steel