User's Manual

www.malags.com
47
5.
The final part is to mount the equipment onto the CART.
Attach the antenna into the skid plate and adjust the straps
accordingly, the skid plate should drag lightly on the ground.
Use the velcro to attach the PC or RAMAC Monitor onto the
upper plate of the CART. Place the PC or the RAMAC Monitor
on the upper plate and place the X3M Unit or X3M Corder unit
directly on the antenna. (See RAMAC X3M Hardware Manual
for additional assembly). If you are using the Control Unit II,
mount the unit on the two hooks placed under the tray.
Have a nice survey!