User's Manual

www.malags.com
22
Power Switch
Fiber optic connectors
LED’s
Battery connector
Figure 5.3 Shielded electronic unit without the optical fibre
cable.
Fiber optic and enocer connectors
to Radar Control Unit
Encoder connection
Figure 5.4 Shielded electronic unit with connected cable hose.
As in the unshielded electronics LED-indicators show the
status of communications between the Shielded Electronics
Unit and the Radar Control Unit.
When flashing, the T and R trigger pulses are being received
from the CUII. No light indicates no power is being received by
the electronics. A steady light indicates that no trigger pulses
are received from the CUII.
When flashing, the LED labeled D indicates that data are sent
to the CUII. No light indicates no power is being received by
the electronics. A steady light indicates that no data are being
transmitted to the CUII.