User's Manual

4
1Introduction
___________________________________________________________
Thank you for purchasing the RAMAC X3M/EasyLocator. We at Mala
GeoScience welcome comments from you concerning the use and
experience of this equipment, as well as the contents and usefulness of this
manual. Please take the time to read through the assembling instructions
carefully and address any questions or suggestions to the following:
MALÅ GeoScience postal address is:
Main Office: Subsidiary:
Malå GeoScience Malå GeoScience USA, Inc. E-Mail: [e-mail]
Skolgatan 11 P.O. Box 80430 [e-mail]
S-930 70 Malå Charleston, SC 29416 [e-mail]
Sweden USA
[e-mail]
Phone: [phone] Phone: [phone]
Fax: [phone] Fax: [phone]
Information about MALÅ Geoscience’s products is also available on
Internet: www.malags.com
(Be sure to include instrument type and serial numbers)
1.1 Unpacking and Inspection
Great care should be taken when unpacking the equipment. Be sure to
verify the contents shown on the packing list and inspect the equipment for
any loose parts or other damage. All packing material should be preserved
in the event that any damage occurred during shipping. Any claims for
shipping damage should be filed to the carrier. Any claims for missing
equipment or parts should be filed with Mala GeoScience.
1.2 Repacking and Shipping
If original packing materials are unavailable, the equipment should be
packed with at least 80 mm of absorbing material. Do not use shredded
fibers, paper wood, or wool, as these materials tend to get compacted
during shipment and permit the instruments to move around inside the
package.