User's Manual

Table Of Contents

The extension handle, with the remote control, are mounted on

the wheel carriage and connected on the back-side of the 2.5

GHz antenna. See picture below.

When the 2.5 GHz system is used together with the RAMAC

XV11 Monitor, you have access o the fully integrated data

collection, 2.5D analysis tool and Migration Wizard.

See Manuals for the XV11 Monitor and Easy3D for further

details.

Note! When working with the high frequency antenna as a hand

held and wall-scanning device, it is required to activate the

kill-switch function (according to FCC part 15.509). For more

information see Section System Settings and FCC Part 15.

When used as a normal GPR, (floor scanning, shallow utility

detection etc.) it’s not required to activate the kill-switch.