ENGLISH (Original instructions) INSTRUCTION MANUAL Blower MT401 013218 DOUBLE INSULATION IMPORTANT: Read Before Using.
ENGLISH (Original instructions) SPECIFICATIONS Model Capacities MT401 1.2 - 2.9 m3/min. Max. air volume No load speed (min-1) 8,500 - 16,000 Overall length 427 mm Net weight 1.5 kg Safety class /II • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications may differ from country to country.
6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 8. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
. Power tool use and care 18. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 19. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 20.
FUNCTIONAL DESCRIPTION • ASSEMBLY CAUTION: Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. • Switch action • CAUTION: Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing the nozzle CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. 1. Switch trigger 2.
Sash nozzle storage 1 1. Sash nozzle 013223 When not in use, the sash nozzle can be conveniently stored at the bottom of the tool as shown in the figure.. OPERATION Blowing 013224 Point the tool to the object to be blown off and turn on the tool. MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. • Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result.
Makita Corporation Anjo, Aichi, Japan 885175-220 8 www.makita.
