Use and Care Manual
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: XUC01
Dimensions
(L x W x H)
When carrier is installed During operation: 1,560 mm x 1,060 mm x 900 mm
(61-1/2″ x 41-3/4″ x 35-1/2″)
When stored: 1,110 mm x 670 mm x 820 mm
(43-3/4″ x 26-3/8″ x 32-1/4″)
When bucket is installed During operation: 1,310 mm x 790 mm x 900 mm
(51-1/2″ x 31-1/8″ x 35-1/2″)
When stored: 1,110 mm x 590 mm x 820 mm
(43-3/4″ x 23-1/4″ x 32-1/4″)
Traveling speed Forward 1.5 or 3.5 km/h (0.9 or 2.2 mile/h)
Reverse 1.0 km/h (0.6 mile/h)
Minimum turning radius 1,075 mm (1.2 yard)
(Outer diameter when turning with front wheel as axis)
Maximum climbing capacity 12°
Maximum load capacity 130 kg (287 lbs)
Brake Front wheel Disc brake with wire
Rear wheel Fixed with pedal
Tire Front wheel Tubeless tire
Rear wheel Self-sealing tire
Rated voltage D.C. 18 V
Standard battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18SD / DC18SE / DC18SF
Net weight When carrier is installed 45 kg (99 lbs)
When bucket is installed 39 - 40 kg (86 - 88 lbs)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or BATTERY-
operated (cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.