Installation Guide

3 / 41
2 CAUTION
Repair the machine in accordance with “Instruction manual” or “Safety instructions”.
Follow the instructions described below in advance before repairing:
・ Wear gloves.
・ In order to avoid wrong reassembly, draw or write down where and how the parts are assembled, and what the parts are.
It is also recommended to have boxes ready to keep disassembled parts by group.
・ Handle the disassembled parts carefully. Clean and wash them properly.
3 NECESSARY REPAIRING TOOLS
Code No.
Description
Use for
1R015-A
Hex head bit H4-150 tightening/ loosening Hex. socket head bolts
1R263
Bearing extractor
replacing Snap in valve
1R366
Feeler gauge set
adjusting the gap between Brake disc and Brake caliper
1R411
Lead wire insert
fixing lead wires in lead wire holders
commercial
product
Bead cream replacing Front tire 430
commercial
product
Lever for replacing tires (2 pcs) replacing Front tire 430
commercial
product
Tire chucking
Supporting tool for air injection into Front tire 430
commercial
product
Tire pressure gauge checking air pressure of Front tire 430
commercial
product
Valve clip Replacing Valve core (valve rubber) inside of Snap in
valve (commercial product)
commercial
product
Decorative valve cap installing Snap in valve
P/N:941201-0
Flat washer 8 installing Snap in valve