Installation Guide

18 / 41
Fig. 42
6
Insert the Yellow line side of Front tire 430 [1] into Brake
disc side of Wheel and engage lower side of Beads with a
Lever [2] for replacing tire.
Tips
Be careful not to make a damage to Wiring of Motor [3]
and Snap in valve [4] and assemble Front tire 430 [1].
If the opposite side of Snap in valve is inserted first it can
be smoothly assembled.
Fig. 43
7
Apply Bead cream to the opposite side of Bead.
Fig. 44
8
Engage the Wheel and Front Tire with Lever for replacing a
tire. Snap in valve [2] area must be inserted in the final step
of insertion.
Fig. 45
9
Put upside-down the Wheel [1]. Turning it push Front tire
430 [2] and pull the Wheel [1] to engage opposite (wiring)
side of Wheel and the Tire.
Tips
If the engagement is smoothly done the sound “poo” will
be heard .
10
Remove Valve core according to Fig.35.
Tips
If Valve core is removed, air will be smoothly pumped up
and bead of Wheel and Tire can be smoothly engaged.
[1]
[2]
[1]
[2]
[1]
[2]
[3]
[4]
Yellow line