Use and Care Manual

4
ENGLISH (Original instructions)
Explanation of general view
1 Switch trigger
2 Attachment (Dust extraction
system)
3 Release button
4 Stroke adjusting button
5 Depth gauge button
6 Depth gauge button carriage
7 Distance (X) equal to the drilling
depth
8 Dust container release button
9 Dust container
10 Filter cover
11 Slit
12 Filter
13 Sealing cap
Specications
Model DX01 DX02
Suction performance 350 l/min
Net weight 1.3 kg (3.0 lbs) 1.4 kg (3.0 lbs)
Rated voltage 18 V
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s)
described.
BL1830
Operating stroke 96 mm MAX
Suitable hammer drill bit 24 mm MAX
Due to our continuing programme of research and development, the specications herein are subject to change
without notice.
Specications and battery cartridge may differ from country to country.
Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use.
Take particular care and attention.•
Read instruction manual.•
IMPORTANT SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions before operating the attachment. Failure to follow
the warnings and instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
1. Use the attachment in accordance with these instructions. Use of the attachment for operations different from
those intended could result in a hazardous situation.
2. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
3. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
4. Always wear eye and respiratory protections.
•
•
•