User Manual

10 ENGLISH
Adjusting the pipe length
CAUTION: Always be sure that the tool is
switched o󰀨 before adjusting the pipe length.
CAUTION: When adjusting the pipe length,
be sure to attach the blade cover before adjusting
the pipe length.
CAUTION: When adjusting the pipe length, be
careful not to pinch your ngers.
CAUTION: Make sure that the lock-lever is
locked securely.
Loosenthelock-lever,thenadjustthelengthofthepipe,
and then lock the lock-lever.
1
►1. Lock-lever
Adjusting the front grip position
CAUTION: Always be sure that the tool is
switched o󰀨 before adjusting the position of the
front grip.
CAUTION: When adjusting the position of the
front grip, be careful not to pinch your ngers.
CAUTION: Make sure that the thumb nut is
tightened securely.
CAUTION: Do not move the front grip beyond
the arrow mark.
Toadjustthepositionofthefrontgrip,loosenthethumb
nutbyturningitcounterclockwise,thenadjusttheposi-
tionofthefrontgrip,andthentightenthethumbnutby
turning it clockwise.
1
2
►1. Thumb nut 2. Arrow mark
ASSEMBLY
CAUTION: Always be sure that the tool is
switched o󰀨 and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION: When replacing the shear blades,
always wear gloves so that your hands do not
directly contact the blades.
Installing or removing the shear
blades
CAUTION: Attach the blade cover before
removing or installing the shear blades.
NOTICE: When replacing the shear blades, do
not wipe o󰀨 grease from the gear and crank.
NOTE: Before installing or removing the shear
blades, unfold the head of the tool so that the head is
straighttothetoolbody.
1. Place the tool upside down.
2. Remove 4 screws with a screwdriver and remove
the shear blades.
1
►1. Screw
3. Remove the crank from the shear blades.
1
►1. Crank
NOTE:Thecrankmayremaininthetool.