User Manual

8 ENGLISH
4. Turn the suction pipe clockwise so that the bolt
on the pipe is aligned with the hole on the main unit,
and then fasten the bolt rmly using the hex wrench to
secure the pipe to the main unit.
1
2
► 1. Suction pipe 2. Bolt
To remove the suction pipe and nozzle, perform the
installation procedure in reverse.
Installing or removing elbow pipe and dust bag
Optional accessory
1. Insert the elbow pipe into the dust bag and tighten
the belt to x the elbow pipe as shown in the gure.
2
3
1
► 1. Dust bag 2. Elbow pipe 3. Belt
2. Attach the elbow pipe to the main unit.
Insert the elbow pipe into the main unit with the bolt facing
left as shown in the gure. Turn the elbow pipe as shown in
the gure so that the bolt is aligned with the hole on the main
unit, and then tighten the bolt rmly using the hex wrench.
1
2
1
► 1. Bolt 2. Elbow pipe