Instruction manual

6
1
012297
3. Insert the lock key in the place shown in the figure
as far as it will go.
4. Close the battery cover and push it on until it is
latched with the locking lever.
To remove the battery cartridge from the mower;
1. Pull the battery cover locking lever toward
yourself and open the battery cover.
2. Pull out the lock key.
3. Withdraw it from the tool while sliding the button
on the front of the cartridge.
4. Close the battery cover.
Battery converters (optional accessory)
WARNING:
• Before installing or removing the battery converters
BCV01/BCV02, remove the lock key.
BCV01 (optional accessory)
WARNING:
• When using the BCV01, never attach it to any part
of your body. Attaching the BCV01 to any part of
your body may cause a serious injury.
1
2
3
012379
Slide the battery converter BCV01 into the installation
hole until it stops.
1
2
012380
Open out the battery cover on the mower and then slide
all the way and click the product mounting adapter of the
BCV01 into the battery port on the mower.
Run the cord of the BCV01 through the slit in the battery
cover and close the battery cover.
1
2
3
012381
Fit the cord of the BCV01 into the upper holders on the
handle.
NOTE:
• When using the battery converter BCV01 (optional
accessory), hook the power cord to the designated
holder on the mower. Failure to do so may cause
the cord to be cut off.
To remove the BCV01 from the mower, open out the
battery cover and then press the hook on the battery
mounting side of the BCV01.
BCV02 (optional accessory)
1
012383
Open the battery cover and click in the BCV02 into the
battery port on the mower.
Close the battery cover.
1. Battery
converter
(BCV02)
1. Cord
2. Slit
3. Upper holders
1. Battery cover
2. Product
mounting
adapter of the
BCV01
1. Battery
converter
(BCV01)
2. Installation hole
3. Hook
1. Lock key