Specifications

6
Side handle (auxiliary handle)
The side handle can be swung 360° on the vertical and secured at any desired
position. It also secures at eight different positions back and forth on the hori-
zontal. Just loosen the clamp nut to swing the side handle to a desired posi-
tion. Then tighten the clamp nut securely.
Installing or removing the bit
Clean the bit shank and apply bit grease before installing the bit.
Pull the tool holder cover down all the way and insert the bit into the tool
holder. Turn the bit and push it in until it engages.
Release the tool holder cover. It will return automatically to its original position
to secure the bit. After installing, always make sure that the bit is securely held
in place by trying to pull it out.
To r em ove t he b it , p ul l t he t oo l h ol de r c ove r d ow n a ll t he w ay a nd p ul l t he b it
out.
1. Side grip
2. Clamp nut
1
2
002901
1. Bit grease
2. Bit shank
1
2
002916
1. Bit
2. Tool holder cover
1
2
002917
002918