Use and Care Manual
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: GDT01
Fastening capacities Machine screw 4 mm - 8 mm (5/32" - 5/16")
Standard bolt 5 mm - 16 mm (3/16" - 5/8")
High tensile bolt 5 mm - 14 mm (3/16" - 9/16")
No load speed (RPM) 4 (Max impact mode) 0 - 3,700 /min
3 (Hard impact mode) 0 - 3,200 /min
2 (Medium impact mode) 0 - 2,100 /min
1 (Soft impact mode) 0 - 1,100 /min
Wood mode 0 - 1,800 /min
T mode (1) 0 - 2,400 /min
T mode (2) 0 - 3,700 /min
Bolt mode (1) 0 - 2,500 /min
Bolt mode (2) 0 - 3,700 /min
Bolt mode (3) 0 - 3,700 /min
Impacts per minute 4 (Max impact mode) 0 - 4,400 /min
3 (Hard impact mode) 0 - 3,600 /min
2 (Medium impact mode) 0 - 2,600 /min
1 (Soft impact mode) 0 - 1,100 /min
Wood mode 0 - 4,400 /min
T mode (1) -
T mode (2) 0 - 2,600 /min
Bolt mode (1) -
Bolt mode (2) 0 - 4,400 /min
Bolt mode (3) 0 - 4,400 /min
Rated voltage D.C. 36 V - 40 V max
Overall length 120 mm (4-3/4″)
Net weight 1.7 - 2.0 kg (3.7 - 4.3 lbs)
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.