Manualshelf

Use and Care Manual

ManualsBrandsMakita ManualsDrills40-Volt Max XGT Brushless Cordless 4-Speed Impact Driver Kit, 2.5Ah
11121314151617181920
14 ENGLISH
Application mode While registering the application mode When the registered application mode
turns on
Wood mode
T mode (1)
T mode (2)
Bolt mode (1)
Bolt mode (2)
Bolt mode (3)
: The lamp is on.
: The lamp is blinking.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched o󰀨 and the battery cartridge is removed
before carrying out any work on the tool.
Installing or removing driver bit/
socket bit
12 mm
(15/32”)
9 mm
(3/8”)
Use only the driver bit/socket bit shown in the gure. Do
not use any other driver bit/socket bit.
1 2
► 1. Driver bit 2. Sleeve
To install the driver bit, insert it into the sleeve as far as it will go.
1 2
► 1. Driver bit 2. Sleeve
To remove the driver bit, pull the sleeve in the direction
of the arrow and pull the driver bit out.