User Manual
12 ENGLISH
OPTIONAL ACCESSORIES
CAUTION: These accessories or attachments are recommended for use with your Makita tool spec-
ied in this manual. The use of any other accessories or attachments might present a risk of injury to persons.
Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
► Fig.19
1 Side grip
2 Wheel guard for depressed center wheel / ap disc / wire wheel brush
3 Inner ange / Super ange *1*2
4 Depressed center wheel / Flap disc
5 Lock nut / Ezynut *1*2
6 Wheel guard for abrasive cut off wheel / diamond wheel *3
7 Inner ange 78 (Australia and New Zealand only) *4
8 Abrasive cut-off wheel / Diamond wheel
9 Outer ange 78 (Australia and New Zealand only) *4
10 Rubber pad
11 Abrasive disc
12 Sanding lock nut
13 Wire wheel brush
14 Wire cup brush
- Lock nut wrench
- Dust cover attachment
NOTE: *1 Only for tools with M14 spindle thread.
NOTE: *2 Do not use Super ange and Ezynut together.
NOTE: *3 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the
special guard covering the both side of the wheel. Follow the regulations in your country.
NOTE: *4 Use Inner ange 78 and Outer ange 78 together. (Australia and New Zealand only)
NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from
country to country.