Use and Care Manual

25
For tool’s long life, and to ensure the full functioning of the safety features, perform maintenance work regularly.
Operating
time
Item
Before
operation
Everyday
Every
week
Every
3 month
Annually
Before
storage
Chain saw
Inspection.
○
Cleaning.
○
Check at authorized service center.
○
Saw chain Inspection./Sharpening if necessary.
○
Guide bar Inspection.
○
Chain brake
Check the function.
○
Have it inspected regularly at authorized service
center.
○
Starter rope Inspection.
○
Chain lubrication Check the oil feed rate.
○
Combination
switch
Inspection.
○
Throttle trigger
lock-out
Inspection.
○
Throttle trigger Inspection.
○
Fuel tank cap Check tightness.
○
Oil tank cap Check tightness.
○
Air cleaner Cleaning.
○
Idle speed The saw chain does not move at idle speed.
○
Cylinder space Cleaning.
○
Spark plug Inspection./Cleaning./Replace if necessary.
○
Spark arrester Inspection./Cleaning./Replace if necessary.
○
Mufer Check tightness of screws.
○
Chain catcher Inspection.
○
Screws and nuts Inspection.
○
Fuel filter Inspection./Replace if necessary.
○
Fuel tank Empty.
○
Carbretor Run empty.
○
* Before emptying oil, check for a suitable way to dispose of old oil. Do not pour it down into sewage drains, onto garden soil or onto open
streams. Your local zoning or environmental regulations will give you more detailed instructions on proper disposal.
MAINTENANCE INTERVAL