User Manual
5
ENGLISH (Original instructions)
Explanation of general view
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Indicator lamps
2-2. Check button
3-1. Battery indicator
3-2. Check button
4-1. Main power button
5-1. Lock-off lever
5-2. Switch trigger
6-1. Main power button
6-2. Speed indicator
7-1. Reverse button
8-1. Most effective cutting area
9-1. Grip
9-2. Handle
9-3. Screw
10-1. Handle clamp
10-2. Screw
12-1. Clamp
12-2. Bolt
14-1. Cutter
14-2. Clamp
14-3. Bolt
15-1. Hex wrench
15-2. Nut
15-3. Cup
15-4. Clamp washer
15-5. Metal blade
15-6. Receive washer
16-1. Hex wrench
16-2. Box driver
16-3. Tighten
18-1. Nylon cutting head
18-2. Metal guard
18-3. Receive washer
18-4. Hex wrench
19-1. Plastic blade
19-2. Nut
19-3. Receive washer
19-4. Hex wrench
20-1. Hex wrench
22-1. Buckle
22-2. Hook
23-1. Buckle
25-1. 80 - 100 mm
SPECIFICATIONS
Model DUR365U
Type of handle Bike handle
No load speed 3,500 / 5,300 / 6,500 min
-1
Overall length (without cutting tool) 1,754 mm
Applicable cutting tool (country specific) Metal blade Nylon cutting head Plastic blade
Cutting diameter 230 mm 350 mm 255 mm
Rated voltage D.C. 36 V
Standard battery cartridge BL1815N / BL1820 / BL1820B
BL1830 / BL1840 / BL1840B /
BL1850 / BL1850B
Net weight (with metal blade) 4.7 kg 5.2 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Noise
Sound pressure level average
Sound power level average
L
PA
(dB (A)) L
WA
(dB (A))
Uncertainty K (dB (A))
Applicable standard
Metal blade 75 86 0.4
Plastic blade 83 92.8 0.6
Nylon cutting head 77 90 2.2
2000/14/EC
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear ear
protection.
Vibration Left hand Right hand
a
h
(m/s
2
)
Uncertainty K (m/s
2
)
a
h
(m/s
2
)
Uncertainty K (m/s
2
)
Applicable
standard
Metal blade 2.5 1.5 2.5 1.5
Plastic blade 2.5 1.5 2.5 1.5
Nylon cutting head 2.5 1.5 2.5 1.5
EN786