Specifications

5
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Switch action
CAUTION:
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the “OFF” position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by
increasing pressure on the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push the lock lever
upward.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
Reversing switch action
This tool has a reversing switch to change the rotational direction. Move the
reversing switch lever to the position (A side) for clockwise (forward) rota-
tion or the position (B side) for counterclockwise (reverse) rotation.
CAUTION:
• Always check the rotational direction before operation.
• Use the reversing switch only after the tool comes to a complete stop. It
will damage the tool to change the rotational direction before the tool
stops.
Hook
When using the hook, pull it out in “A” direction and then push it in “B” direction
to secure in place.
When not using the hook, return it back to its initial position by following the
above procedures in reverse.
1. Switch trigger
2. Lock lever
1
2
003020
1. Reversing switch lever
1
A
B
003027
1. Hook
1
A
003032
B
003033