User Manual

4
Confor
ms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The T
echnical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3
070, Belgium
31.12
.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3
070, Belgium
GEA010-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings a
nd
instruction
s may result in electric shock, fire and/or
serious injury
.
Save all warnings and instructions for
future reference.
GEB088-1
CORDLESS DRIVER DRILL
SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury
.
2.
Hol
d power tool by insulated grippi
ng
surfaces
, when performing an operati
on
w
here the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
3. Hol
d power tool by insulated gripping
surfaces, when performing an operation
w
here the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shoc
k.
4.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. H
old the tool firmly.
6. Keep hands a
way from rotating parts.
7. Do not leave the tool running. Operate the tool
onl
y when hand-held.
8. Do not touch th
e drill bit or the workpiec
e
i
mmediately after operation; they may be
extremely hot and could burn your skin.
9. Some mate
rial contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow materi
al
supplier safet
y dat
a.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained
from repeated use) replace strict
adherence
to safet
y rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious pers
onal
injury.
ENC007-7
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary mark
ings on (1)
batter
y charger, (2) battery, and (3) product
using battery.
2. Do not disassemb
le battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explo
sion.
4. If e
lectrolyte gets into your eyes, rinse them
out with clear water and seek medical
attention right away. It may result in loss of
your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a
container with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A
battery short can cause a large current flow
,
ov
erheating, possible burns and even a
breakdown.
6. Do not stor
e the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 ﾟ C (
122 ﾟ F).
7. Do not
incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
9. Do not use a
damaged battery.
SAVE THESE INSTRUCTIONS.