User Manual

3
EN
GLISH (Original instructions
)
Explanation of general view
1-1. Red indicator
1-2. But
t
on
1-3. Bat
tery cartridge
2-1. Star marki
ng
3-1. Switch trigger
4-1. Reversing switch lev
er
5-1. S
peed change le
ver
6-1. Ad
justing ring
6-2. Graduation
6-3. Poi
n
ter
7-1. Sle
eve
SPECIFICATIONS
Model DDF343 DDF453
Steel 10 mm 13 mm
Wood 25 mm 36 mm
Wood screw 5.1 mm x 63 mm 6 mm x 75 mm
Capacities
Machine screw 6 mm
High (2) 0 - 1,300
No load speed (min
-1
)
Low (1) 0 - 400
Overall length 192 mm 214 mm
Net weight 1.4 kg 1.6 kg
Rated voltage D.C. 14.4 V D.C. 18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
ENE034-1
Intended use
The tool is intended for drilling and screw driving in w
ood,
met
al and plas
tic.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60
745:
Model DDF343
Sound pressure level (L
pA
) : 70 dB (A) or less
Uncert
ainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB
(A)
Model DDF453
Sound pressure level (L
pA
) : 72 dB (A)
Uncertainty (K) : 3 dB
(A)
The noi
se level under working may exceed 80 dB (A)
Wear ear protection
ENG900-1
Vibration
The v
ibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: drilling into meta
l
V
ibration emission (a
h,D
) : 2.5 m/s
2
or less
Uncert
ainty (K) : 1.5 m/s
2
ENG
901-1
•
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one
tool
w
ith another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used
.
• Be sure to identify safety measures to protect the
operator
that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such
as
the
times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of
Machine:
Cordless Driver Dril
l
Model No./
Type: DD
F343,DDF453