User Manual

Adjusting depth

cut

Loosen the lever on the depth guide and

move the base up or down. At the desired

depth of cut, secure the base by tightening

the lever.

Fig.

CAUTION:

Use

shallow depth of cut when cutting thin workpiece for cleaner, safer cuts.

After adjusting the depth of cut, always tighten the lever securely.

Bevel cutting

Loosen the lever on the bevel

scale

plate on

the front of the base.

Set

for the desired

angle

(0"-

45")

by tilting accordingly, then

tighten the lever securely.

Sighting

The front of the base

notched to provide

two guide edges.

For straight cuts, align the edge with

en-

graved on

with your cutting line on the

workpiece.

For

45"

bevel cuts, align the edge with

45"

engraved on

with your cutting line.

jvel scale plate

Lever

Fig.