Jackhammer Trolley JHT-U-2 OPERATOR’S MANUAL 0919
TABLE OF CONTENTS INTRODUCTION................................................................................................................................................... 1 DISCLAIMER ......................................................................................................................................................... 1 ABOUT THIS MANUAL .........................................................................................................................................
INTRODUCTION Thank you for purchasing a MAKINEX product. This manual provides information and procedures to safely operate and maintain the JHT-U2 Jack Hammer Trolley. For your own safety and protection from injury, carefully read, understand, and observe the safety instructions described in this manual. Keep this manual or a copy of it with the machine. If you lose this manual or need an additional copy, please contact MAKINEX.
ABOUT THIS MANUAL This manual is designed to provide the user with the information required to operate and maintain the Jackhammer Trolley correctly and safely. This manual uses the following symbols to help differentiate between different kinds of information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment. Follow all safety messages to avoid or reduce the risk of serious injury or death.
SAFETY INFORMATION Throughout this document there are several safety warnings. The user should read through this complete document before using the Jackhammer Trolley. Ensure you read all information contained in this manual before using the READ Jackhammer Trolley. CAREFULLY Read all safety and instructional stickers displayed on each component of the READ Jackhammer Trolley.
SAFETY DECAL There is a safety and information panel provided on the front of the Jackhammer Trolley to alert the user of potential safety risks/hazards. Please read and adhere to all instructions on the Unit.
PRODUCT DESCRIPTION AND SPECIFICATION The Jackhammer Trolley enables your demolition hammer to lift most types of Ceramic Floor Tiles, Vinyl and Cork with less effort. With a wide range of angle, the Jackhammer Trolley adapts to any situation with a maximum leverage. Features • Durable zinc coated frame • Easy Angle adjustment • Will suit most 16kg (35lbs) hammers • Anti-vibration ergonomic design • Large wheels HEIGHT WHEN RAISED 1100mm/43.3’’ HEIGHT WHEN LOWERED 600mm/23.
PRODUCT BREAKDOWN Block Set to suit Jackhammer brand provided. See Appendix A for Universal Block Set (JHTB-U-2) assembly.
Step 2: Step 3: JHT-U-2 – User Manual REV0919 Page 7 of 15
Step 4: BRAKE LEVER ADJUSTMENTS 1. Ensure cable is not kinked anywhere along its length. 2. Tighten retaining screw with pliers. 3. Tighten adjustment screw with 2mm allen key to remove slack from the cable. NOTE: Some slack in the mechanism is normal.
USING THE JHT-U-2 Ensure the machine is switched OFF before plugging in. WARNING CAUTION Ensure Chisel or Tile Smasher is correctly inserted and locked in position before use. 1. Ensure Hammer/Breaker is secure and cannot rotate. 2. Guide the Hammer/Breaker cable through the cable holder on the handle. 3. Position and angle before commencing work. To change the angle: a. Lift the handles to take the weight off lock mechanism. b. Pull the brake lever to disengage the lock mechanism. c.
LIMITED WARRANTY To take advantage of the MAKINEX limited warranty, you must have maintenance performed by an authorised MAKINEX dealer or MAKINEX service technician. You are free to have your MAKINEX product serviced by any suitably qualified persons and this will not affect your statutory warranties, however, failure by the owner to have the recommended servicing carried out by an authorised MAKINEX dealer/service technician means that you cannot take advantage of the MAKINEX limited warranty.
WARRANTY EXCLUSIONS • Warranty does not cover wear and tear, breakage, misuse or theft. • Warranty does not cover consumables (e.g. blades). • Warranty does not cover attachments (e.g. Shanks and Tile Smasher heads). • Warranty will not apply to parts and/or labour if this Jackhammer Trolley is deemed to be misused, neglected, installed improperly or set up incorrectly. • Cosmetic defects such as decals and coating.
CONTACT INFORMATION For sales, service, warranty and parts for all MAKINEX products; please refer below. SALES, SERVICE, SPARE PARTS & WARRANTY SALES TEL 1300 795 953 or +61 2 9460 8071 WEB www.makinex.com.au AUSTRALIA SERVICE, SPARE PARTS & WARRANTY EMAIL service@makinex.com.au SALES TEL +1 855-625-4639 WEB www.makinex.com USA SERVICE, SPARE PARTS & WARRANTY EMAIL service@makinex.com UK WEB www.makinex.co.uk EUROPE TEL +31 (0)6 24881203 or +31 (0)6 50841849 EMAIL info@mtools.
APPENDICES A. BLOCK SETS BREAKDOWN B.
APPENDIX B – JHT-U-2 RISK ASSESSMENT JHT-U-2 – User Manual REV0919 Page 14 of 15
JHT-U-2 – User Manual REV0919 Page 15 of 15
