Instructions / Assembly

JHT Operator’s Manual Rev0415 Page 18 of 27
STEP 2 – Using the Hammer Trolley
WARNING
Ensure the machine is switched OFF before
plugging in
CAUTION
Ensure Moil is correctly inserted and locked
in position before use
1. Ensure Hammer is secure in clamping mechanism and
cannot rotate.
2. Position and angle before commencing work.
To change angle - lift handles to take weight off lock
mechanism then pull the brake lever to disengage the
lock mechanism. Lift or lower the height of the handles
to achieve the desired angle of jackhammer then
release brake lever to reengage the lock mechanism.
3. Never allow Hammer or moil to overheat.
4. Switch on with trigger
5. Lock into position with trigger lock
6. Refer to Hammer Instruction Manual for more detail on
operation and service
WARNING
Always switch off machine before
unplugging