Jackhammer Trolley JHT OPERATOR’S MANUAL
CONTENTS ABOUT THIS MANUAL 2 - Key Terms 2 - Disclaimer 3 PRODUCT INFORMATION 4 - Safety Information 4 o General Safety Instructions 4 o Safety Stickers 5-6 - Warranty 7-10 - Product Description and Specifications 12-13 14 INSTRUCTIONS FOR USE - STEP 1 – Fitting A Jack Hammer 14-17 - STEP 2 – Using the Hammer Trolley 17-18 - STEP 3 – Servicing the Hammer Trolley 19 20-26 APPENDIX A. JHT PARTS BREAKDOWN B. BLOCK SETS BREAKDOWN C. HAZARD ASSESSMENT D.
ABOUT THIS MANUAL This manual is designed to provide the user with the information required to operate and maintain the Jack Hammer Trolley correctly and safely. Key Terms READ CAREFULLY – refers to important information that should be paid careful attention. READ CAREFULLY CAUTION CAUTION - indicates a situation that may cause injury or damage to the machine if the user does not follow the instructions.
Disclaimer MAKINEX, and its affiliates, takes no responsibility for any damage, injury or death resulting from the incorrect or unsafe use of this machine. Use of this machine should be undertaken by competent persons only. It is the operators’ responsibility to ensure that the following safety procedures are followed.
PRODUCT INFORMATION Safety Information General Safety Instructions Throughout this document there are several safety warnings. The user should read through this complete document before using the Jack Hammer Trolley. Ensure you read all information contained in this manual before using the Jack Hammer READ CAREFULLY Trolley Ensure you read the manual and safety instructions for the Jack Hammer and other READ components that are part of this unit.
Safety Stickers There is a safety and information panel provided on the front of the Jack Hammer Trolley to alert the user of potential safety risks/hazards. Please read and adhere to all instructions on the Unit.
JHT Operator’s Manual Rev0315 Page 6 of 27
Warranty In order to take advantage of the MAKINEX limited warranty, you must have maintenance performed according to the schedule (contained in relevant owner’s manual supplied with this product), by an authorised MAKINEX dealer or MAKINEX service technician.
WARRANTY: (Ex-factory/ Reseller premise) MAKINEX warrants to the original purchaser: MAKINEX provides a Limited One Year Warranty that applies to Jack Hammer Trolley only (this excludes the Jack Hammer and any other attachments and consumables). Any unauthorized repair or part replacement will void warranty. Refer to manufacturer for all repairs. Regular service must be carried out by competent persons only; failure to comply will void warranty.
Responsibility of the consumer under this Limited Warranty: - Strict adherence to the maintenance checks and schedule with proof of scheduled maintenance service required by an authorised agent or qualified mechanic. - Maintenance services are not covered under warranty. - It is the consumer’s responsibility to deliver the machine in question to our service premises or to the premises of our appointed agent at the consumer’s expense for replacement or repair as applicable.
- Where the specific warranty component (e.g. Jack hammer) is under a Manufacturer’s warranty other than MAKINEX (e.g. Bosch, Hitachi, Makita, Hilti etc), the consumer can either contact MAKINEX or the applicable Manufacturer for repairs where such warranty was registered with that manufacturer at purchase. - Warranty calls will only be carried out by our representatives and not via client’s choice of repairer.
SERVICE & PART ORDERING For service and ordering parts, please call AUS: 1300 795 953 or +61 2 9460 8071 USA: 407-446-1996 EUROPE: +31 (0)6 24881203 or +31 (0)6 50841849 Or your nearest MAKINEX distributor We have very knowledgeable, experienced staff to assist you with help and advice.
Product Description and Specifications The versatile Jackhammer Trolley packs a punch, saving you a lot of hard work and effort. Let the Jackhammer Trolley take the workload of your back! No more struggling or bending trying to handle heavy hammers, the trolley takes the pain out of demolition and renovation. The Jackhammer Trolley enables your demolition hammer to lifts most types of linoleum and tile, break rocks and blocks, crack concrete and sandstone all with a minimum of effort.
TABLE 2: Product Specifications HEIGHT WHEN RAISED 1100mm/43.3’’ HEIGHT WHEN LOWERED 600mm/23.6’’ OVERALL WIDTH 510mm/20’’ OVERALL LENGTH 1100mm/43.
INSTRUCTIONS FOR USE WARNING Do not operate the Jack Hammer without wearing the appropriate personal protective equipment and assessing the surrounding area for hazards. STEP 1 – Fitting a Jack Hammer Tools Required 17mm socket Phillips head screwdriver 19mm socket Pliers Shifter Instructions 1.
2. Attach the handle to the frame with the two mounting bolts provided. 3. NOTE – for Block Set details refer to APPENDIX B. Lower trolley to its lowest position and support the end to hold the frame level, then place the base blocks on the frame. Place the jackhammer on top of the base blocks.
4. Place top blocks and the cover plate on top of the jackhammer and tighten the supplied bolts until they are snug. 5.
Brake Lever Adjustment Instructions 1. Ensure cable is not kinked anywhere along its length 2. Tighten retaining screw with pliers 3. Tighten adjustment screw to remove slack from the cable. Note that some slack in the mechanism is normal.
STEP 2 – Using the Hammer Trolley WARNING Ensure the machine is switched OFF before plugging in CAUTION Ensure Moil is correctly inserted and locked in position before use 1. Ensure Hammer is secure in clamping mechanism and cannot rotate. 2. Position and angle before commencing work. To change angle - lift handles to take weight off lock mechanism then pull the brake lever to disengage the lock mechanism.
STEP 3 – Servicing the Hammer Trolley Every Use: Inspect frame for damage Ensure bolts are secure Every 6 Months: Adjust brake lever to eliminate free-play o See page 13 for details Lubricate brake lever cable o Drip oil from the top of the cable so it runs through the cable housing o Use light weight oil; grease or heavy oil will clog the cable housings Grease the pivot axle o Use a grease gun and apply grease until excess starts to leak out.
APPENDICES A. JACK HAMMER TROLLEY PARTS BREAK DOWN B. BLOCK SETS BREAKDOWN C. JACK HAMMER TROLLEY - HAZARD ASSESSMENT D. BLOCK SET PART SELECTION DETAILS E. SALES AND SPARES F.
Appendix A – JHT PARTS BREAKDOWN www.makinexusa.
www.makinexusa.
www.makinexusa.
Appendix C – Hazard Assessment JHT Operator’s Manual Rev0415 Page 24 of 27
Appendix D – Sales and Spares For sales and spare parts please refer to your local distributor below. SERVICE & PART ORDERING For service and ordering parts, please call AUS: 1300 795 953 or +61 2 9460 8071 USA: 407-446-1996 EUROPE: +31 (0)6 24881203 or +31 (0)6 50841849 Or your nearest MAKINEX distributor We have very knowledgeable, experienced staff to assist you with help and advice. W makinex.com E sales@makinex.
Appendix E – Jackhammer Manual Refer to your Jack Hammer manual for safety and operation instructions.
JHT Operator’s Manual Rev0415 Page 27 of 27
