Product Manual

GEN – 16P – User Manual Page 13 of 22
OPERATING GENERATOR
WARNING
Read and adhere to all safety and operation instructions.
CAUTION
Always have the brake down while it is stationary.
STARTING THE GENERATOR
1. Remove all connections from the AC sockets.
2. If the fuel tank is equipped with a valve, be sure the fuel valve is in the OPEN or ON
position before attempting to start the engine.
3. Turn the engine switch to the START position and hold it there until the engine starts.
4. When the engine starts, release the engine switch, allowing it to return to the ON
position.
CONNECTING ELECTRICAL DEVICES
The generator can supply 240V AC through 2 x 15amp sockets and 415V AC through the
32A socket.
1. Connect the appliance to the generator starting with the device that draws the most
current.
2. Set the circuit breaker to ‘ON’.
SHUTTING DOWN THE GENERATOR
1. Disconnect all appliances connected to the generator.
2. Allow to cool for two (2) minutes under no load.
3. Turn the ignition key to the OFF position.
NOTE: To stop the generator in an emergency simply turn the ignition key to the
off position.