Operating Guide

GEN-10P – USER MANUAL REV0819 Page 3 of 22
PRODUCT INFORMATION
SAFETY INFORMATION
WARNING
Read this manual thoroughly before operating your
generator. Failure to follow instructions could result in
serious injury or death
WARNING
MAKINEX GEN-10P Generator designed for
professional operators only, instruct operators in care
and use of the machine before use!
DANGER
GENERAL SAFETY PRECAUTIONS
• ALWAYS use in a well-ventilated area.
• ALWAYS ensure the applied load does not exceed the generators rating.
Overloading the generator is dangerous and could cause serious damage.
• ALWAYS disconnect the generator when carrying out any maintenance.
• ALWAYS ensure the generator reaches operating speed before connecting
a load.
• ALWAYS start the engine BEFORE connecting any appliances to the output
receptacles.
• ALWAYS test the RCBO’s before use.
• ALWAYS check the generator for damage before use.
• ALWAYS keep well clear of all moving parts on the generator at all times.
• NEVER allow children or animals near the generator.
• NEVER connect to a commercial or mains power supply, or any other
electrical source.
• NEVER allow the generator to run out of fuel when a load is connected.
• NEVER alter or tamper with the internal wiring of the generator.
• NEVER climb or stand on the generator as dents may cause overheating of
the acoustic lining.
• NEVER touch any part of the engine, alternator or exhaust when the
generator is in use as these get hot and could burn.