User Guide

If you are under WiFi deauth attacked, RGB LED will turn red and buzzer start playing
music. If nothing happened then RGB LED turn green.
You can plug it into power bank or any 5V USB port.
It is also an ESP8266 starter kit, you can use it learn esp8266.
You can start from how to control buzzer or RGB LED.
ESP-12E inside, it has 4MB memory.Simple code test:
USB attack firmware: https://github.com/spacehuhn/esp8266_deauther/releases
RGB LED Test:
You have to install Adafuit RGB LED library first.
https://github.com/lspoplove/DSTIKE/blob/master/Deauther_RGB_Test.ino
Here you have to change"define DIN_PIN 15" to "define DIN_PIN 4"
CP2102 Driver Download:
https://github.com/spacehuhn/esp8266_deauther/wiki
Deauth Detect source code: https://github.com/spacehuhn/DeauthDetector
Package Including
1 * ESP8266 Deauther Detector V3 with Case