User manual

Wunderbar v2 23-10-17
10. Unplug Wunderbar from USB port and plug it again to force Windows
to use new drivers.
11. Put Wunderbar into firmware update mode:
(a) Press and hold User button (figure 4)
(b) Press and release Reset button (figure 4)
(c) release User button
12. Click on Windows start button and type ‘Device Manager‘ (in German
Windows version please type ‘Ger¨ate-Manager‘)
13. Wunderbar will be visible as ‘WunderBar firmware update‘ device un-
der ‘Universal Serial Bus devices‘
Page 9 of 28