User manual

Wunderbar v2 23-10-17
(b) Wunderbar will be visible as ‘WUNDERBAR V2 CDCVCOM‘
or ‘USB Serial Device (COMX)‘ device under ‘Ports (COM &
LPT)‘
Number after ‘COM‘ in brackets indicate port number and this
name should be used in CoolTerm when selecting port.
5. Open CoolTerm app and configure serial port and baudrate as shown
on figure 8. Baudrate should be set 115200, name of serial port will
differ on each computer and system. On Windows it should be COMX
(where X is a number) and on Linux/macOS it should be similar to
the figure.
Page 22 of 28