User manual

Wunderbar v2 23-10-17
Any other file will mean that update failed. You can open FAIL.TXT
or ASSERT.TXT to check exact error message.
23. Put Wunderbar into firmware update again (like in step 5)
24. Verify again that Wunderbar is in firmware update mode and available
to dfu-util (like in step 16)
25. Upgrade Wunderbar with latest firmware:
dfu-util.exe -d 15a2:1000 -a 0 -D wunderbar_v2.bin
Output will look similar to this:
26. Finally restart Wunderbar with Reset button. User led should start
blinking, indicating that Wunderbar is ready for onboarding.
That completes firmware upgrade procedure. Freshly upgraded Wunderbar
has latest V2 firmware and can be onboarded as described in chapter 4.
Page 13 of 28