Instructions

https://www.conrad.de/

https://docs.makerfactory.io/

■ ESP32-Microcontroller with Wi and Bluetooth

■ 5.08 cm (2") LCD, 1W speaker, microSD slot,

I2C port, 3D antenna

■ 150 mAh Battery, GPIO pins incl. USB-C cable

■ Incl. MPU6886 BMM150 motion sensor

Operation

Bottom View

Internal View

Side View Assembly

Item no. 2179959

5.08 cm (2”) LCD 320x240

SD-Reader

MicroSD Card

(SD-Card)

SD- CARD

READER

SD-CARD READER

BMM150

PAGE 1
5.08 cm (2”) LCD 320x240 SD-Reader Bottom View Side View Assembly BMM150 ■ ESP32-Microcontroller with Wifi and Bluetooth ■ 5.08 cm (2") LCD, 1W speaker, microSD slot, I2C port, 3D antenna ■ 150 mAh Battery, GPIO pins incl. USB-C cable ■ Incl. MPU6886 BMM150 motion sensor SD-CARD READER Operation Item no. 2179959 https://www.conrad.de/ MicroSD Card (SD-Card) SD- CARD READER Internal View https://docs.makerfactory.
PAGE 2
Extension Schematic Example Quick Start 1. Execute a example like FactoryTest.ino 2.Download Arduino-ESP32 Support. Open Arduino IDE, and click: File->Preferences->Settings Click Tools->Board:->Boards Manage...ESP32 in the new pop-up dialog, click: install Select your board name, baud rate, the specified serial port: M5Stack-Core-ESP32, 921600, COM4. The serial port you will be connected to on your PC is COM4 2. New M5Stack program MPU 6886 Open Arduino IDE, then a new .