Instructions

ManualsBrandsMAKERFACTORY ManualsArduinoMAKERFACTORYM5 Stack DC-MOTOR Modul

BN 2141872

M5Stack DC Motor Module

EN Quick Instructions

Version: 1

Delivery Content

l Module

l DC Motor cable (JST/RJ12, approx. 10 cm)

l DC connector (XT30/Barrel)

Development Resources

Development resources and additional product information are avail-

able from:

https://www.conrad.de/ https://docs.makerfactory.io/

Description

The module features a MEGA328 and a L293DD driver offering 4 chan-

nels for motor control and communicates through I2C (Address:

0x56).

Extra power (6 - 12 V/DC) can be supplied through the DC input.

The M5Stack Core is then directly powered through the M-Bus con-

nection.

Specifications

Micro controller MEGA328

Summary of content (4 pages)

PAGE 1
BN 2141872 M5Stack DC Motor Module EN Quick Instructions Version: 1 Delivery Content l Module l DC Motor cable (JST/RJ12, approx. 10 cm) l DC connector (XT30/Barrel) Development Resources Development resources and additional product information are available from: https://www.conrad.de/ https://docs.makerfactory.io/ Description The module features a MEGA328 and a L293DD driver offering 4 channels for motor control and communicates through I2C (Address: 0x56).
PAGE 2
6 – 12 V/DC Power input (additional) XT30/Barrel connector Drivers L293DD (4 channels) (ø 5.5 x 2.1 mm ) 4x motor port (JST/RJ12) Connections 2x I2C Grove port (extends Port A of M5 Core) Protocol I2C (Address: 0x56) Dimensions (approx.) 54 x 54 x 13 mm (W x D x H ) Weight (approx.) 14 g Disposal Electronic devices are recyclable waste and must not be disposed of in the household waste. At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
PAGE 3
BN 2141872 M5Stack DC-Motor Modul DE Kurzanleitung Version: 1 Lieferumfang l Modul l DC-Motorkabel (JST/RJ12, ca. 10 cm) l DC-Adapter (XT30/Rundstecker-Buchse) Ressourcen für Entwickler Ressourcen für Entwickler und zusätzliche Informationen zum Produkt sind verfügbar über: https://www.conrad.de/ https://docs.makerfactory.io/ Beschreibung Das Modul verfügt über einen MEGA328 und einen L293DD Treiber mit 4 Kanälen zur Motorsteuerung und kommuniziert über I2C (Adresse: 0x56).
PAGE 4
Technische Daten Micro-Controller MEGA328 6 – 12 V/DC Eingangsspannung (zusätzlich) XT30/Rundstecker-Buchse Treiber L293DD (4 Kanäle) (ø 5.5 x 2.1 mm ) 4x Motoranschluss (JST/RJ12) Anschlüsse 2x I2C Grove port (erweitert Port A des M5 Core) Protokoll I2C (Adresse: 0x56) Abmessungen (ca.) 54 x 54 x 13 mm (B x T x H) Gewicht (ca.) 14 g Entsorgung Elektronische Geräte sind Wertstoffe und gehören nicht in den Hausmüll.