Manual

Procedure
1. Prepare a sketch with the given code and upload it to your
board.
2. Connect the module/component to the board as shown in
the connection diagram or table.
3. Connect an LED to pin 13 on your board.
4. Trigger the Reed switch. The LED goes on.
Specifications
Operating voltage 5 V/DC
Resistor 10 kΩ
Dimensions (approx.) 25 x 15 mm
Weight (approx.) 2 g
Disposal
Electronic devices are recyclable waste and must not be dis-
posed of in the household waste.
At the end of its service life, dispose of the product in
accordance with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the pro-
tection of the environment.
3