Instructions

Driver installation instruction 2016-06-28
Raspberry Pi LCD
Driver installation instruction
(method2: offline)
This manual is applicable to all series of Raspberry Pi LCD; if you already have the driver
installation CD, can just use it offline.
Step 1, Install Raspbian official image
1) Download the latest Raspbian Image from the official website: https://www.raspberrypi.org/downloads/
2) Format TF card by SDFormatter
3) Burn the official image into TF card by using Win32DiskImager.
Step 2, obtain the LCD driver
Extract from the companion CD or ask for it from the seller;
Copy the LCD-show-160701.tar.gz drive to the Raspberry Pi system root directory
(Suggestion: copy flash driver directly to TF card after completion of Step 1, or copy by
SFTP or other methods for remote copy). Unzip and extract drive files as the following
command:
cd /boot
sudo tar zxvf LCD-show-160701.tar.gz
cd LCD-show/
Step 3, install LCD driver
# the corresponding execution for the use of 2.4” LCD Raspberry Pi:
sudo ./LCD24-show
# the corresponding execution for the use of 2.8” LCD Raspberry Pi:
sudo ./LCD28-show
# the corresponding execution for the use of 3.2” LCD Raspberry Pi:
sudo ./LCD32-show
# the corresponding execution for the use of 3.5” LCD Raspberry Pi:
sudo ./LCD35-show
# the corresponding execution for the use of 3.97” LCD Raspberry Pi:
sudo ./LCD397-show
# the corresponding execution for the use of 4.3” LCD Raspberry Pi:
sudo ./LCD43-show
# the corresponding execution for the use of 5.0” LCD Raspberry Pi:
sudo ./LCD5-show
# the corresponding execution for the use of 7.0” LCD version B 800*400:
sudo ./LCD7B-show
# the corresponding execution for the use of 7.0” LCD version C 1024*600: