Instructions

7
Game and Knowledge in Electronics-Lab
You have probably thought about it yourself: it is possible to also
switch on the other LEDs. To do this, the cable to the positive pole
only needs to be connected to another LED (LED2 … LED6). They
can also light up at the same time, if you use several cables. In fact,
three cables can be connected to the Bat+ connector. Or you keep
connecting the positive pole to each of the following LEDS.
LED1
LED2
LED3
LED4
LED5
LED6
LED7
1
2
3
4
5
6
4.5v
BAT BAT
2
Two or more LEDs
Two different connection diagrams with similar results
If you connected more than
one LED in this manner, you
have created a parallel
circuit. The six LEDs in the
LED strip are arranged in
parallel and create up to
six parallel paths for the
electric current. This no
longer a simple circuit, but
a branched circuit. At each
branch, a part of the current
flows one way, another part
of the current takes another
way.