Instructions

3
What makes the projects in this box so special? You do! And an incred-
ible micro-controller. Each module contains an electronic component,
which works together with a small but powerful computer in your mi-
cro-controller module.
6 b a S e p l a t e S
You can combine these
perforated plates to
make large surfaces,
angles or boxes. This is how
you assemble the devices.
The diagrammes show a number
of suggestions. But once you’ve
worked with it for a while, you can
put your own ideas into reality.
Wide Tabs
Narrow Tabs
mo d u l e S
The modules contain the electronic components of your experiment box.
Each module has one or more connectors, and each connector has
three contacts to insert the cables. Here we show you all components:
pictures of the modules on the left or at the top, the associated circuit
diagrammes on the right or below. Each connector of each module has
three contacts for the cables. Each contact has the same function.
X Loudspeaker
X Battery compartment
You can learn how to insert
the batteries on the last page.
When putting the base plates together,
pay close attention to the nose-pieces and
gaps at their edges. Once the plates are stuck
together, you should not try to twist them.
X LED strip
X Three-color LED