Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 84 2015-08-03
<index2> from the current phone book memory storage selected with
+CPBS. If <index2> is left out, only location <index1> is returned.
+CPBR:<index1>,<number>,<type>,<text>
[[…]<CR><LF>+CPBR: <index2>, <number>, <type>, <text>]
OK
x1>[,<index2>]
Parameters
<index1> Read as of this location number
<index2> Read to this location number
<number> Phone number
<type> Type of number
<text> Text for phone number in current TE character set specified by
+CSCS.
Parameter Saving
Mode
NO_SAVE
Max Response
Time
3 seconds (single reading)
30 seconds (complete reading of a 250 records full phonebook.
We use the China Mobile sim cards for testing, which produced by Axalto
at 2010 for Shanghai. Use other sim cards may have different results.
Reference
3GPP TS 27.007
[13]
Note
3.2.26 AT+CPBS Select Phonebook Memory Storage
AT+CPBS Select Phonebook Memory Storage
Response
+CPBS: (list of supported <storage>s)
OK
Test Command
AT+CPBS=?
Parameters
See Write Command
Response
+CPBS: <storage>,<used>,<total>
OK
Read Command
AT+CPBS?
Parameters
See Write Command
Write Command
AT+CPBS=<stora
ge>
Response
TA selects current phone book memory storage, which is used by other
phone book commands.
OK