Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 77 2015-08-03
See Write Command
Response
+CLIR: <n>, <m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+CLIR?
Parameters
See Write Command
Response
TA restricts or enables the presentation of the CLI to the called party when
originating a call.
The Command overrides the CLIR subscription (default is restricted or
allowed) when temporary mode is provisioned as a default adjustment for
all following outgoing calls. This adjustment can be revoked by using the
opposite Command.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CLIR=<n>
Parameters
<n> (parameter sets the adjustment for outgoing calls):
0 Presentation indicator is used according to the subscription of
the CLIR service.
1 CLIR invocation
2 CLIR suppression
<m> (parameter shows the subscriber CLIR service status in the
network):
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed
Parameter Saving
Mode
NO_SAVE
Max Response
Time
15s
Reference Note
3.2.20 AT+CMEE Report Mobile Equipment Error
AT+CMEE Report Mobile Equipment Error