Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 335 2015-08-03
17 AT Commands for RECORD Application
17.1 Overview
Command Description
AT+CREC Record operation
AT+CRECORD Record and send data to UART
17.2 Detailed Descriptions of Commands
17.2.1 AT+CREC Record Operation
AT+CREC Record Operation
Response
+CREC: (1-n),(1-10)
OK
Test Command
AT+CREC=?
Parameters
See Write Command
Response
+CREC: <status>
OK
Read Command
AT+CREC?
Parameters
<status> 0 idle state
1 recording state
2 playing state
Write Command
AT+CREC=<mo
de>,[<id>]
Response
OK
1) mode=1,start record
AT+CREC=1,<id>,<form>,[<time>][,<location>],[<quality>],[<input
path>]
OK
2) mode=2,stop record
AT+CREC=2
OK
+CREC: 2,<id>,<form>,<time>,<len>