Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 33 2015-08-03
If busy and (parameter setting ATX3 or ATX4)
BUSY
If a connection cannot be established
NO CARRIER
If the remote station does not answer
NO ANSWER
If connection successful and non-voice call.
CONNECT<text> TA switches to data mode.
Note: <text> output only if ATX<value> parameter setting with the
<value> >0
When TA returns to Command mode after call release
OK
If successfully connected and voice call
OK
Parameters
<str> String type (string should be included in quotation marks) value
("x"), which should equal to an alphanumeric field in at least one phone
book entry in the searched memories. <str> formatted as current TE
character set specified by +CSCS.
<mgsm> String of GSM modifiers:
I Actives CLIR (Disables presentation of own number to
called party)
i Deactivates CLIR (Enable presentation of own number to
called party)
G Activates Closed User Group invocation for this call only
g Deactivates Closed User Group invocation for this call only
<;> Only required to set up voice call, return to Command state
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference
V.25ter
Note
Parameter "I" and "i" only if no "*#" code is within the dial string
*# codes sent with ATD are treated as voice calls. Therefore, the Command
must be terminated with a semicolon ";"
See ATX Command for setting result code and call monitoring parameters.