Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 308 2015-08-03
Mode
Max Response Time -
Reference Note
 Other AT commands (but AT+POP3OUT) can not be executed
until the data of response are read completely.
 If <confLength> is less than <reqLength>, you should wait for a
URC “+POP3READ: 3,<dataLength>” reported. Then you may
continue to read data by AT+POP3READ.
 If the module has some unread data, the URC “+POP3READ:
3,<dataLength>” is reported every once in a while. After so
me time, these data are not still read, the module will quit th
e POP3 process.
14.2.20 AT+POP3DEL Mark the Specific Email to Delete
AT+POP3DEL Mark the Specific Email to Delete
Response
+POP3DEL: (range of supported <msgNumber>s)
OK
Test Command
AT+POP3DEL=?
Parameters
See Write Command
Response
OK
If error is related to ME functionality:
ERROR
If POP3 server issues a positive response:
+POP3DEL: 1
If POP3 server issues a negative response:
+POP3DEL: 0
If some error occur:
+POP3OUT: <code>
Write Command
AT+POP3DEL=<m
sgNumber>
Parameters
<msgNumber> The message number of Email
<code> The result of logging out POP3 server
1 Normally log out POP3 server
61 Network error
62 DNS resolve error
63 POP3 tcp connection error
64 Timeout of POP3 server response
Parameter Saving
Mode
NO_SAVE