Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 300 2015-08-03
on the network status.
<code> See AT+SMTPSEND
Parameter Saving
Mode
NO_SAVE
Max Response Time -
Reference Note
 <reqLength> can not be greater than <maxLength>.
 When “+SMTPFT: 1,<maxLength>” is reported, then use
AT+SMTPFT=<reqLength> to send data.
14.2.12 AT+SMTPCS Set the Email Charset
AT+SMTPCS Set the Email Charset
Response
+SMTPCS: <charsetLength>
OK
Test Command
AT+SMTPCS=?
Parameters
See Write Command
Response
+SMTPCS: <charset>
OK
Read Command
AT+SMTPCS?
Parameter
See Write Command
Response
OK
If error is related to ME functionality:
ERROR
Write Command
AT+SMTPCS=<cha
r
set>
Parameters
<charset> The Email charset, string type. It shows which charset
the subject and the body are encoded in. If <charset> is not
ASCII but UTF-8 or other, the subject and the body must be
in hexadecimal format (e.g. “TEST” should be converted to
“54455354”).
The default charset is ASCII.
<charsetLength> The max length of <charset>.
Parameter Saving
Mode
NO_SAVE
Max Response Time -