Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 280 2015-08-03
Response
If mode is 0 or 1
OK
If mode is 2
+FTPEXTPUT: <pos>,<len>
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+FTPEXTPUT
=<mode>[,<pos>,<
len>,<timeout>]
Parameters
<mode>
0 use default FTPPUT method
1 use extend FTPPUT method
2 download data which need to PUT to RAM
<pos> data offset address 0-300k
<len> data length 0-300k
<timeout> timeout value of serial port 1000ms-1000000ms
Parameter Saving
Mode
NO_SAVE
Max Response
Time
75 seconds(In case no response is received from server)
Reference Note
When extend FTPPUT mode is activated, input data then execute
"AT+FTPPUT=1" to transmit, after session is complete, if successful, it
returns "+FTPPUT: 1,0", otherwise it returns "+FTPPUT: 1,<error>",
<error> see "AT+FTPGET".
12.2.21 AT+FTPMKD Make Directory on the Remote Machine
AT+FTPMKD Make Directory on the Remote Machine
Test Command
AT+FTPMKD=?
Response
OK
Response
If success:
OK
+FTPMKD: 1,0
If failed:
OK
+FTPMKD: 1,<error>
If error is related to ME functionality:
+CME ERROR: <err>
Execution
Command
AT+FTPMKD
Parameters
<error> See "AT+FTPGET"