Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 263 2015-08-03
BREAKEND: <value>
USERDATA: <value>
OK
Parameters
<mode> 0 Saved, the value from NVRAM
1 Unsaved, the value from RAM
For other parameters, see the related command.
Response
TA saves HTTP Application Context which consists of following AT
Command parameters, and when system is rebooted, the parameters will
be loaded automatically.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Execution
Command
AT+HTTPSCON
T
Parameters
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
This command can only be used after run AT+HTTPINIT.
11.2.8 AT+HTTPSTATUS Read HTTP Status
AT+HTTPSTATUS Read HTTP Status
Test Command
AT+HTTPSTAT
US=?
Response
OK
Read Command
AT+HTTPSTAT
US?
Response
+HTTPSTATUS: <mode>,<status>,<finish>,<remain>
OK
If error is related to ME functionality:
+CME ERROR: <err>