Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 238 2015-08-03
0 2400
1 4800
2 9600
3 14400
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
8.2.20 AT+CIPSRIP Show Remote IP Address and Port When Received Data
AT+CIPSRIP Show Remote IP Address and Port When Received Data
Response
+CIPSRIP: (list of supported <mode>s)
OK
Test Command
AT+CIPSRIP=?
Parameters
See Write Command
Response
+CIPSRIP: <mode>
OK
Read Command
AT+CIPSRIP?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CIPSRIP=<
mode>
Parameters
<mode> A numeric parameter which shows remote IP address and
port.
0 Do not show the prompt
1 Show the prompt, the format is as follows:
1) For single IP connection (+CIPMUX=0)
+RECV FROM:<IP ADDRESS>:<PORT>
1) For multi IP connection (+CIPMUX=1)
+RECEIVE,<n>,<data length>,<IP ADDRESS>:<PORT>
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-