Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 236 2015-08-03
OK
ERROR
AT+CIPSPRT=<
send prompt>
Parameters
<send prompt> A numeric parameter which indicates whether to echo
prompt ‘>’ after module issues AT+CIPSEND command.
0 It shows "send ok" but does not prompt echo ‘>’ when sending
is successful.
1 It prompts echo ‘>’ and shows "send ok" when sending is
successful.
2 It neither prompts echo ‘>’ nor shows "send ok" when sending is
successful.
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
8.2.18 AT+CIPSERVER Configure Module as Server
AT+CIPSERVER Configure Module as Server
Response
+CIPSERVER: (0-CLOSE SERVER, 1-OPEN SERVER),(1-65535)
OK
Test Command
AT+CIPSERVE
R=?
Parameters
See Write Command
Response
+CIPSERVER: <mode>[,<port>,<channel id>,<bearer>]
OK
Read Command
AT+CIPSERVE
R?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CIPSERVE
R=<mode>[,<por
t>]
Parameters
<mode> 0 Close server
1 Open server
<port> 1..65535 Listening port
<channel id> Channel id
<bearer> GPRS bearer
Parameter Saving NO_SAVE