Manual

Smart Machine Smart Decision
SIM800 Series_AT Command Manual_V1.09 235 2015-08-03
OK
Parameters
See Write Command
Response
+CIPATS: <mode>,<time>
OK
Read Command
AT+CIPATS?
Parameters
See Write Command
Response
OK
ERROR
Write Command
AT+CIPATS=<m
ode>[,<time>]
Parameters
<mode> A numeric parameter which indicates whether set timer when
module is sending data
0 Not set timer when module is sending data
1 Set timer when module is sending data
<time> 1..100 A numeric parameter which indicates the seconds
after which the data will be sent
Parameter Saving
Mode
NO_SAVE
Max Response
Time
-
Reference Note
8.2.17 AT+CIPSPRT Set Prompt of ‘>’ When Module Sends Data
AT+CIPSPRT Set Prompt of ‘>’ When Module Sends Data
Response
+CIPSPRT: (list of supported <send prompt>s)
OK
Test Command
AT+CIPSPRT=?
Parameters
See Write Command
Response
+CIPSPRT: <send prompt>
OK
Read Command
AT+CIPSPRT?
Parameters
See Write Command
Write Command Response